Procedure After Replacing The Adf Unit; Pickup Feed Unit; Removing The Adf Pickup Feed Unit - Canon Color imageCLASS MF9170c Service Manual

Chapter 5
[2]
F-5-17
6) Close the ADF upper cover [1].
[1]
F-5-18
7) Remove the ADF unit communication cable [1].
- 1 screw [2]
- 1 connector [3]
- 1 wire saddle [4]
F-5-19
5-8
[3]
[1]
[1] [3]
[2] [4]
8) Open the ADF unit [1].
9) Remove the ADF unit [1].

5.4.1.2 Procedure after Replacing the ADF Unit

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
After replacing the ADF unit, execute automatic detection of the CCD read-
ing position at ADF stream reading in the following service mode.
COPIER> FUNCTION> INSTALL> STRD-POS
[Operation]
Adjust the reading position by moving the scanner in increments of 0.1
mm.
[Time]
When the lamp is turned on: Adjustment time; 10 seconds
When the lamp is not turned on: Lamp adjustment time; 10 to 30 seconds
+ Adjustment time; 10 seconds

5.4.2 Pickup Feed Unit

5.4.2.1 Removing the ADF Pickup Feed Unit

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
[1]
F-5-20
[1]
F-5-21
0021-0352
0019-5863