Pickup Motor; Before Removing The Pickup Motor; Removing The Pickup Motor - Canon Color imageCLASS MF9170c Service Manual

Chapter 8
F-8-28

8.5.3 Pickup Motor

8.5.3.1 Before Removing the Pickup Motor

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 10-11)Reference [Removing the Rear
Cover Unit]
3) Remove the right cover.(page 10-11)Reference [Removing the Right
Cover]

8.5.3.2 Removing the Pickup Motor

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Open the front cover [1].
F-8-29
2) Remove the link [1] from the shaft [2].
F-8-30
3) Fit the link [1] with the cutoff of the shaft [2] to remove the link.
F-8-31
4) Free the cable from the cable guide [1].
8-22
5) Disconnect the 3 connectors [1].
0019-5826
0019-5829
6) Remove the cable guide [1].
- 1 screw [2]
- 2 claws [3]
[1]
7) Remove the rod [1].
- 1 claw [2]
8) Fit the rod [1] with the cutoff of the shaft [2] to remove the rod.
F-8-32
F-8-33
F-8-34
F-8-35
F-8-36