10.5 Parts Replacement Procedure
10.5.1 Front Cover
10.5.1.1 Before Removing the Front Cover Unit
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 10-11)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 10-13)Reference [Removing the Left Cov-
er]
4) Remove the right cover.(page 10-11)Reference [Removing the Right
Cover]
10.5.1.2 Removing the Front Cover Unit
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Turn the 2 drawer connectors [1] up.
[1]
2) Remove the cable cover [1].
- 1 screw [2]
- 1 claw [3]
[3]
[1]
F-10-5
[2]
[1]
F-10-6
3) Remove the relay connector [1] and the harness [2] from the harness guide
[3].
0018-9092
0018-9093
4) While lifting the front cover unit [1], remove the 2 links [2] from the 2
shafts [3] and raise it in the direction of the arrow.
[1]
5) Turn the 2 hinges [1] up in the direction of the arrow.
- 4 screws (binding) [2]
[2]
[3]
[1]
F-10-7
[3]
[2]
[3]
[2]
F-10-8
Chapter 10
10-9