Print; Print List - Canon Color imageCLASS MF9170c Service Manual

Chapter 16
Sub item
SCAN READ Start copyboard scanning operation to read white level of the document (original).
FLOW SCAN Start stream scanning operation to read white level at stream scanning.
READ
KDT-DF1-R Display DT-DF1-R
KDT-DF1-G Display DT-DF1-G
KDT-DF1-B Display DT-DF1-B
KDT-DF2-R Display DT-DF2-R
KDT-DF2-G Display DT-DF2-G
KDT-DF2-B Display DT-DF2-B
ADF-ADJ Execute adjustment of ADF
DF-STRM Not used
DF-SPEED Not used
DF-OFFST Not used
DF-POSAD Not used
<SENSOR>
Checking Sensor
Sub item
HP-SENS Home position sensor
1: HP, 0: anything other than HP
TP-SENS Sensor for paper in tray
1: presence of paper, 0: no paper
REG-SENS Pre-registration sensor
1: presence of paper, 0: no paper
ESS-SENS Front door sensor
1: ON, 0: OFF
<ADFTEST>
ADF Feeding Test
Execute feeding operation according to the scanning feeding speed (specified in SPEED, 2-SIDE, COUNT)
Sub item
SPEED Not used
2-SIDE Select ON/OFF for duplex mode
COUNT Not used
START Start feeding
<BOOKFEED>
Testing Book Feed Operation
Sub item
PAGE Display the number of pages that had been book-fed
START Start book feeding

16.5.3 PRINT

16.5.3.1 PRINT List

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
<PRINT>
Printing PG pattern
Sub item
PG-TYPE Enter PG number
COUNT Enter the number to be output
PHASE Select 1-sided/2-sided
MODE Not used
THRU Not used
DENS-M Not used
16-36
TESTMODE > SCAN > ADJUST
Description
T-16-63
TESTMODE > SCAN > ADJUST
Description
T-16-64
TESTMODE > SCAN > ADFTEST
Description
T-16-65
TESTMODE > SCAN > BOOKFEED
Description
T-16-66
TESTMODE > PRINT
Description
0020-2026