Removing The Pickup Feed Unit; Parts Replacement Procedure; Pickup Feed Unit; Before Removing The Pickup Feed Unit - Canon Color imageCLASS MF9170c Service Manual

Chapter 8

8.5 Parts Replacement Procedure

8.5.1 Pickup Feed Unit

8.5.1.1 Before Removing the Pickup Feed Unit

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 10-11)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 10-13)Reference [Removing the Left Cov-
er]
4) Remove the right cover.(page 10-11)Reference [Removing the Right
Cover]
5) Remove the Front Cover Unit.(page 10-9)Reference [Removing the
Front Cover Unit]

8.5.1.2 Removing the Pickup Feed Unit

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the cover [1].
- 1 screw [2]
F-8-20
2) Remove the 2 plates [1]
- 2 screws [2]
[1]
F-8-21
3) Remove the PCB cover [1]
- 2 claws [2]
8-20
[1]
[2]
[2]
0019-5825 [1]
0019-5824
4) Disconnect the 4 connectors [1].
5) Remove the relay connector [2] and the harness [3] from the harness guide
[1].
[2]
F-8-22
[1]
F-8-23
[2]