Chapter 10
[1]
[4]
[2]
[4]
[4]
[1]
[6]
F-10-34
2) Remove the controller box [1].
- 6 screws [2]
[2]
F-10-35
10.5.9 Laser Scanner Cover
10.5.9.1 Before Removing the Laser Scanner Cover
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 10-11)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 10-13)Reference [Removing the Left Cov-
er]
4) Remove the right cover.(page 10-11)Reference [Removing the Right
Cover]
5) Remove the Electrical Components Cover.(page 10-15)Reference [Re-
moving the Electrical Components Cover]
6) Remove the Controller Box.(page 10-15)Reference [Removing the Con-
troller Box]
7) Remove the Off Hook PCB. (only of the machine with FAX)(page 10-
25)Reference [Removing the Off Hook PCB]
8) Remove the DC Controller PCB.(page 10-22)Reference [Removing the
DC Controller PCB]
10.5.9.2 Removing the Laser Scanner Cover
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
10-16
[2]
[4]
[5]
[4]
[4]
[3]
[1]
[2]
0020-3335
0020-3295
1) Remove the harness guide [1].
- 1 cable clip [2]
- 1 cable holder [3]
- 1 flat cable [4]
- 4 screws [5]
[5]
[1]
[1]
F-10-36
2) Remove the right frame reinforcement plate [1].
- 8 screws [2]
[4]
[3]
[5]
[2]
Need help?
Do you have a question about the Color imageCLASS MF9170c and is the answer not in the manual?