Canon Color imageCLASS MF9170c Service Manual page 306

Hide thumbs Also See for Color imageCLASS MF9170c:
Table of Contents

Advertisement

Compatibility
<CST>
Sub item
CST-U1
Not used
CST-U2
Not used
CST-U3
Not used
<ACC>
Sub item
COIN
ON/OFF setting for the coin vendor display
- Change the message on the control panel prompting an operator to set a control card to the one prompting him/her to insert a coin.
Setting value:
0: Default message; "Set a control card."
1: Message for a coin vendor; "Insert a coin."
[Factory setting value/Value after RAM clearing: 0]
CARD
Setting for installation of the new card reader
Enter a card number.
Setting range: 0 to 99999
[Factory setting value/Value after RAM clearing: 0]
When a card number is entered, the following settings are made.
- Initialize the information registered for department management.
- Register the following number of cards based on the card number entered.
MF9130/MF9150c/MF9170/MF9170C/MF9330C/MF9340C/MF9340C/MF9370C/iR C1021/iR C1021i/iR c1022/iR C1022i/iR C2110F/iR
C2110N:
1000 cards
MF8450/MF8450C:
100 cards
However, the number of usable IDs is 99999 maximum.
- When 0 is specified for the card number, the department ID is registered from 1.
CONTROL
Control of PDL printer output
Setting value: 0: Perform printing without a card. 1: Perform printing when a card is inserted.
[Factory setting value/Value after RAM clearing: 0]
CC-SPSW
Setting of whether or not to support the control card I/F (CC-V)
Setting value: 0: Do not support the control card I/F. 1: Support the control card I/F.
[Factory setting value/Value after RAM clearing: 0]
<INT-FACE>
Not used
<ASSPST-D>
Not used
<ASSPST-P>
Not used
<LCNS-OF>
Disabling no transfer of license
- ST-xxxx, Display of the installation status
Sub item
ST-SEND
Display of the installation status of the Send function when disabling no transfer
Setting value: 0: ON, 1: OFF
[Factory setting value/Value after RAM clearing: 0]
No.
yes
946
Sent scans/e-mails (black and white)
947
Sent scans/FTP (color)
948
Sent scans/FTP (black and white)
949
Sent scans/SMB (color)
950
Sent scans/SMB (black and white)
951
Sent scans/IPX (color)
952
Sent scans/IPX (black and white)
953
Sent scans/databases (color)
954
Sent scans/databases (black and white)
955
Sent scans/local prints (color)
956
Sent scans/local prints (black and white)
957
Sent scans/box (color)
958
Sent scans/box (black and white)
yes
959
Media scans (color)
yes
960
Media scans (black and white)
COPIER > OPTION > CST
COPIER > OPTION > ACC
COPIER > OPTION > LCNS-OF
Counter description
T-16-25
Description
T-16-26
Description
T-16-27
Description
Chapter 16
16-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Color imageclass mf9150cColor imageclass mf8450c

Table of Contents