Canon Color imageCLASS MF9170c Service Manual page 85

[2]
6) Close the ADF upper cover [1].
[1]
7) Remove the ADF unit communication cable [1].
- 1 screw [2]
- 1 connector [3]
- 1 wire saddle [4]
[3]
[1]
F-4-14
F-4-15
[1] [3]
[2] [4]
F-4-16
8) Disconnect the 2 connectors [1]. Open the connector holder [2] to discon-
nect the flat cable [3].
[3]
[2]
F-4-17
9) Open the ADF unit + reader unit [1].
[1]
F-4-18
Points to note at work
Be sure not to close the ADF unit + reader unit hastily. If closing the ADF
unit + reader unit hastily, the impact can cause damage.
Also be careful not to get your hands caught between the ADF unit + reader
unit and the host machine.
10) Remove the 2 hinge stoppers [1].
- 2 screws (binding) [2]
Points to Note When Removing the Hinge Stopper
When removing both the left and right hinge stoppers, the ADF + the reader
unit close under their own weight, in which your hand may be caught. Be
sure to perform the operation while holding them with one hand.
Chapter 4
[1]
4-9