Jam Code; Jam Code (Main Body); Jam Code (Adf) - Canon Color imageCLASS MF9170c Service Manual

Chapter 14

14.3 Jam Code

14.3.1 Jam Code (main body)

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
Code Name
0104 Delay jam in paper pickup section
0208 Stationary jam in paper pickup section
010c Delay jam in deliver section
0210 Stationary jam in delivery section
0214 Stationary jam in machine
1118 Door open jam
0221 Reverse section JAM
0228 Reverse re-pickup section jam

14.3.2 Jam Code (ADF)

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
Code Name
0001 ADF paper trailing edge sensor (SR719)
not reaching (delay jam)
0002 ADF paper trailing edge sensor (SR719)
stray (stray jam)
0094 Initial stationary (in-body residual jam)
0095 Pickup NG
14-8
T-14-6
Sensor No.
SR710 The registration sensor cannot detect the leading edge of paper from the moment paper
pickup starts to the moment the jam detection time is reached.
SR710 The registration sensor cannot detect the no paper status specified time before the leading
edge of the picked up paper reaches this sensor.
SR710, SR6005 - The fixing delivery sensor cannot detect presence of paper within the specified time after
turning on of the registration clutch.
- The fixing delivery sensor detected absence of paper within the specified time after the
sensor had detected presence of paper within the specified time after turning on of the
registration clutch.
- The No.1 delivery sensor cannot detect presence of paper within the specified time after
turning on of the fixing delivery sensor.
SR710, SR6005 - The fixing delivery sensor cannot detect absence of paper within the specified time after
turning off of the registration clutch.
- The fixing delivery sensor cannot detect absence of paper within the specified time after
the sensor detected the leading edge of paper.
- The No.1 delivery sensor cannot detect absence of paper within the specified time after the
sensor detected the leading edge of paper.
SR706, SR710, Paper was detected in the paper transport path during initial rotation, during automatic
SR6001, SR6005 delivery, at the end of cleaning, or at reception of an emergency stop command.
SR720 The door was opened when there was printing paper in the transport path.
SR706, SR715 This jam is applied when the double-fed paper drops on the back of the host machine.
The machine determines the reverse section jam if the paper length that is detected by the
reverse sensor (SR706) is 50mm or more longer than the paper length that is detected by the
delivery sensor (SR715).
SR710 The machine determines the reverse re-pickup jam if the registration sensor (SR710) cannot
detect the presence of paper within the specified time (t) after the duplexing pickup starts.
Specified time (t) differs depending on the feeding speed.
1/1 speed: approx. 2.0 sec
4/5 speed: approx. 2.5 sec
1/2 speed: approx 4.0 sec
T-14-7
Sensor No.
SR719 The leading edge of paper does not reach the ADF paper trailing edge sensor (SR719) within
1.8 sec after the trailing edge of precedent page passes through the ADF paper trailing edge
sensor (SR719) in 1-sided multiple jobs.
The leading edge of paper does not reach the ADF paper trailing edge sensor (SR719) within
1.2 sec after reverse operation starts in 2-sided job.
SR719 The trailing edge of paper does not passes through the ADF paper trailing edge sensor (SR719)
within 3.4 sec after the leading edge of paper reaches the ADF paper trailing edge sensor
(SR719) in 1-sided job.
The trailing edge of paper does not passes through the ADF paper trailing edge sensor (SR719)
within 3.5 sec after the leading edge of paper reaches the ADF paper trailing edge sensor
(SR719) in 2-sided job.
SR719 The ADF paper trailing edge sensor (SR719) detects paper at power-ON.
SR718 The paper is removed from the ADF original tray within 0.1 sec after the start key is pressed.
Description
Description
0020-4442
0020-4444