Canon Color imageCLASS MF9170c Service Manual page 294

Sub item
CARD
ERR E355-CLR
E719-CLR
PWD-CLR
FILE-SYS
FORMAT FMT-USB
FMT-LDRV
FMT-SD
512
1024
2048
CA-KEY
ERDS-DAT
DEPT-USR
SYS-INFO
ALL
EAM-DAT
ELA-DAT
<MISC-R>
Sub item
SCANLAMP Turning on the scanning lamp
<MISC-P>
Sub item
MISC-SW
MISC-NUM
OUTPUT SRVC-DAT
SYS-DAT
SYS-DMP
CNTR
ERR-LOG
SPEC
ERDS-COM
SRVC-LBL
<SENS-ADJ>
COPIER > FUNCTION > CLEAR
Clearing of the connection information of a new card reader equipment
Clear data related to card IDs (department).
Operation method
1) Set the department management in user registration to OFF.
2) Execute this item.
3) Execute COPIER>FUNCTION>CLEAR>ERR>E719.
4) Turn off the main power switch.
5) Remove the control card equipment.
6) Turn on the main power switch.
Not used
Clearing of E719
Clear the connection information of the control card equipment and coin robo.
Clearing of the password of a system administrator
Initialization of the file system for the main and optional ROMs (File decompression)
Not used
Not used
Not used
Not used
Not used
Not used
Initialization of the CA certificate installed (Only displayed after the activation of e-RDS function)
Initialization of e-RDS parameters (Only displayed after the activation of e-RDS function)
- ERDS SWITCH
- RGW-ADDRESS
- RGW-PORT
- CNT-DATE
- CNT-INTV
- COM-LOG
Setting the ID management by department and user management to OFF
Clearing of the system administration password
Clearing of the following items
- USER DATA
- SERVICE DATA
- JOB ID
- Histories
- Clearing date
MEMO:
USER DATA/SERVICE DATA are initialized for the default destination setting.
Not used
Not used
COPIER > FUNCTION > MISC-R
COPIER > FUNCTION > MISC-P
Not used
Not used
Output of the system data list/system dump list
Output of the system data list
Mainly output the report of each service software switch and parameter used for FAX function.
Output of the system dump list
Output the service data such as the number of communication, number of received sheets, number of sent sheets, number of recording
sheets, and number of errors, etc.
Output of the counter report
Display the counter indicating how often the function of reading, recording, communication, and copy operation is performed.
Output of error logs
Output of the spec report
Print the current equipment condition.
Output of e-RDS communication error logs
Not used
Description
T-16-12
Description
T-16-13
Description
Chapter 16
16-13