Panel; Panel List - Canon Color imageCLASS MF9170c Service Manual

Chapter 16
Sub item
V34G3TX SPEED
3429baud
3200baud
3000baud
2800baud
2743baud
2400baud
<FACULTY>
Sub item
G34800TX G34 800TX
DETECT1 CI
CI FREQ
HOOK
FC
DETECT2 CMG
FED
CML
DETECT3 CMG
FED
CML

16.5.5 PANEL

16.5.5.1 PANEL List

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
<PANEL>
Key, wheel, LCD, LED, and flicker check
Sub item
KEY CHECK START
16-38
TESTMODE > FAX > MODEM
Close DC circuit to deliver the selected frequency using the modem's G3 signal delivery function (V. 34)
TESTMODE > FAX > FACULTY
Close DC circuit to deliver the frequency of 4800bps using the modem's G3 signal delivery function.
Ring detection
Check Ci, Fc and hook state (ON, OFF) from l-line.
CNG detection test 1
Check CNG signal and FED
Make CML relay at ON state to detect CNG
CNG detection test 2
Check CNG signal and FED
Make CML relay at OFF state to detect CNG
TESTMODE > PANEL
Key check
Check the operation of the key on the control panel.
The following table shows information displayed when pressing each key.
When pressing the OK key after operation check, OK or NG is displayed in the following condition.
OK: Operation was correctly performed for all keys.
NG: A failure occurred to key operation. (Clicking the
Type of Key
Main Menu key
Custom key 1
Custom key 2
Status monitor/Cancel key
Left any key
Right any key
1
2
3
4
5
6
7
8
9
*
0
#
Log in/out key
Clear key
Back key
Description
T-16-68
Description
T-16-69
Description
key displays the keys which have not been pressed sequentially.)
T-16-70
Character String Displayed
MAIN
COPY
SEND
JOB
MENU-L
MENU-R
1
2
3
4
5
6
7
8
9
*
0
#
ID
C
RETURN
0020-2028