Fixing Motor; Before Removing The Fixing Motor; Removing The Fixing Motor - Canon Color imageCLASS MF9170c Service Manual

Chapter 9
[2]
[1]
[3]
F-9-39

9.4.4 Fixing Motor

9.4.4.1 Before Removing the Fixing Motor

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
MEMO:
26 parts (e.g.: external cover, unit) need to be removed when removing the
fixing motor. Be sure to have enough space equivalent to 1,900mm x
1,100mm for storing parts.
1100mm
9-12
[1]
0018-9647
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 9-6)Reference [Removing the Fixing
Assembly]
3) Remove the rear cover unit.(page 10-11)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 4-8)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 10-13)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 10-11)Reference [Removing the Right
Cover]
7) Remove the Upper Frame Unit.(page 10-18)Reference [Removing the
Upper Frame Unit]
8) Remove the Reversal Unit.(page 8-28)Reference [Removing the Revers-
al Unit]
9) Remove the Fixing Drive Unit.(page 9-9)Reference [Removing the Fix-
ing Drive Unit]

9.4.4.2 Removing the Fixing Motor

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Disconnect the 3 connectors [1].
2) Remove the fixing driver PCB [1].
- 3 screws [2]
[1]
[2]
[2]
3) Free the harness [1] from the harness guide [2].
4) Remove the screw [3] to pull out the sensor and the attaching plate [4].
[1]
F-9-40
F-9-41
0018-9695