Delivery Tray Cover; Before Removing The Delivery Tray Cover; Removing The Delivery Tray Cover - Canon Color imageCLASS MF9170c Service Manual

Chapter 10
[1]
[4]
F-10-27
Point to Note at Installation
Be sure to install the left cover by fitting the boss [1] and the projection [2]
of the left cover with the harness guide hole [3] and the groove [4] of the host
machine.
[3] [4]

10.5.6 Delivery Tray Cover

10.5.6.1 Before Removing the Delivery Tray Cover

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 9-6)Reference [Removing the Fixing
Assembly]
3) Remove the rear cover unit.(page 10-11)Reference [Removing the Rear
Cover Unit]
4) Remove the left cover.(page 10-13)Reference [Removing the Left Cov-
er]
5) Remove the right cover.(page 10-11)Reference [Removing the Right
Cover]
10-14
[2]
[3]
[2]
[1]
0019-5964

10.5.6.2 Removing the Delivery Tray Cover

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Pull the delivery tray [1] out.
2) Move the delivery tray [1] in the direction of the arrow and release the 2
projections [2] from the 2 claws [3] of the delivery tray cover to remove.
[3]
F-10-28
3) Remove the 2 claws [2] and the 2 bosses [3] at both sides of front upper
cover 2 to remove them in the direction of the arrow [A].
4) Move front upper cover 2 [1] in the direction of the arrow [B] and release
the 4 claws [4] to remove.
[ A ]
[2] [3]
F-10-29
5) Open the delivery cover [1].
0019-5965
[2]
[1]
[2]
[2]
[3]
[ A ]
[1]
[ B ]
[4]