Manual Separation Roller; Before Removing The Manual Feed Separation Pad; Removing The Manual Feed Separation Pad - Canon Color imageCLASS MF9170c Service Manual

9) Fit the rod [1] with the cutoff of the shaft [2] to remove the rod.
10) Remove the holder [1].
- 2 screws [2]
11) Remove the plate [1].
- 1 screw [2]
12) Remove the 4 screws [1]
13) Put the right side of the host machine downward to slide the bottom plate
[1] for about 30mm from the pickup drive unit [2].
F-8-63
F-8-64
F-8-65
F-8-66
F-8-67
14) Remove the pickup drive unit [1].
- 2 screws [2]
F-8-68
15) Remove the plate [1].
- 4 screws [2]
F-8-69
16) Remove the manual feed pickup solenoid [1].
- 1 screw [2]
F-8-70

8.5.8 Manual Separation Roller

8.5.8.1 Before Removing the Manual Feed Separation
Pad
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]

8.5.8.2 Removing the Manual Feed Separation Pad

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the cassette.
2) Remove the manual feed separation pad [1].
- 1 screw [2]
Chapter 8
0018-9210
0018-9211
8-27