Chapter 9
9.4 Parts Replacement Procedure
9.4.1 Fixing Unit
9.4.1.1 Removing the Fixing Assembly
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
Points to Note At Operation
When removing the fixing assembly, perform the operation after the fixing
assembly is surely cooled. The fixing assembly just after printing may cause
burn injury.
1) Open the ADF Unit + Reader Unit [1].
2) Open the fixing cover [2].
3) Raise the control panel unit[3] forward.
[1]
4) While pressing the fixing assembly lever [1] (2 points at left and right),
remove the fixing assembly [2].
Points to Note When holding the fixing assembly
Be sure to hold the fixing assembly with three fingers or more when lifting
the fixing assembly to prevent it from falling.
9-6
[2]
[3]
F-9-4
0018-9295
[2]
9.4.2 Fixing Sleeve Unit
9.4.2.1 Before Removing the Fixing Sleeve Unit
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the fixing assembly.(page 9-6)Reference [Removing the Fixing
Assembly]
9.4.2.2 Removing the Fixing Sleeve Unit
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Turn the gear [1] in the direction of the arrow to the position [2].
[1]
[1]
F-9-5
F-9-6
0019-5848
0019-5850