Log Off - IPC IQ/MAX TOUCH User Manual

Figure 2: Login screen
1. To log in to the turret as an end user, do one of the following:
•
Tap
Personal Extension
•
Tap
Login Name
2. Tap
Password
3. Tap .
Sign In
The login credentials are validated. If they are correct, the system initializes and brings up the main
application area. For more information, see
If unsuccessful, verify your login credentials and re-enter them.
The password is dependent on the password policy for the system.
Note
Login credentials persist at the turret if this feature has been enabled and configured in the UMS by your
administrator. The next time you attempt to log in, the login screen displays the login name and personal
extension of the last logged in user. The user's password does not persist and must be entered manually.
Note
Do not attempt to log in to a second turret with the same user ID if the first turret has not completed
logging in. The first turret will become non-functional.
1.3.3

Log off

Log off from a turret.
For an illustration of the User badge and User menu popover, see
on page 33.
1. Tap User badge in the Footer.
The User menu popover is displayed.
2. Tap .
Logout
You are asked to confirm the log out.
3. At the prompt, tap
The login screen is displayed.
IPC Proprietary
and enter your personal extension.
and enter your login name.
and enter your password.
to proceed with the log out operation.
Logout
1.3: IQ/MAX TOUCH basics
Application area on page 23.
User menu popover and User badge
IQ/MAX TOUCH Turret User Guide
17
Unigy 4.3