Function Buttons - IPC IQ/MAX TOUCH User Manual

3. Tap
Remove
The button assignment is removed. The button is empty and available for assignment.
You can also remove a button in Edit mode. See
4.9

Function buttons

A function button performs a special action before a call or during a call, and is invoked by tapping a
single button.
Function buttons technically operate as a macro; that is, a sequence of multiple actions that are executed
as a single button operation. Function buttons are created by selecting individual functions from the
available set and assigning them as a custom function button within the Favorites application.
Function buttons can be configured by an administrator from the UMS or by you, if you have been
assigned sufficient privileges. Function buttons configured at the turret are saved to your Favorites app.
The following table lists commonly-used functions that can be assigned to a function button (in the order
that they appear in the
Table 3: Assignable functions
Function
Macro
Direct Page
Direct Intercom
Hunt
Do Not Ring
Privacy
Intercom
Get CLI
Suppress CLI
Toggle CLI
Page Up
IPC Proprietary
.
Add Button: Function Button Options
Create a key sequence of function button actions. It is recommended
that an administrator configure macros from the UMS.
Go directly to a page in the Button Sheet. Valid range is 0 - 50. Each
page counts as a 1/4 sheet, or 12 buttons. So if you set the page to 5, it
will bring you to the start of sheet 2.
Directly dials a specified ICM number.
Start a hunt for an idle line.
Mute the ringer on the turret. Does not stop intercom calls. Activating
the Do Not Ring function button does not change the Do Not Disturb
presence status of the turret user. The turret user continues to be in
Available mode.
Presence Do Not Disturb is a separate feature. For more information,
see Presence
Beginning with Unigy v4.1, the button label for this function button was
changed from
was connected to a Unigy v4.1 or higher zone is redirected to a pre-
Unigy v4.1 zone, the button label does not change from
Do Not Disturb
Make the next call private.
Start an intercom call from Button Sheet.
Show CLI for a button configured for
too long. You do not see the CLI if you are programming the turret.
Close the Function menu.
Block your calling line identity at the far end.
Change from your default CLI (name or number) to the other option.
Stops default toggle and changes it manually.
Scroll up the Button Sheet page.
Move or swap a button on page 54.
dialog).
Description
on page 40.
to
Do Not Disturb Do Not Ring
, it remains .
Do Not Ring
No CLI
IQ/MAX TOUCH Turret User Guide
4.9: Function buttons
. If an IQ/MAX TOUCH that
to
Do Not Ring
or show the full CLI if it is
Unigy 4.3
55