Spatial Audio - IPC IQ/MAX TOUCH User Manual

Figure 61: Speakers - Non-Solo Audio volume
1 Global speakers audio icon
2 Non-Solo Audio volume slider
3 Current volume indicator
4 Reset button
3. To turn off speaker solo mode, do one of the following:
•
Tap the
Speaker solo
•
Increase or decrease the volume on a different speaker channel.
•
Enable speaker solo mode on a different speaker channel.
You can mute the channel while it is in speaker solo mode. For information, see
page 137.
10.4.10

Spatial audio

Spatial audio provides a virtual audio experience for IQ/MAX TOUCH end users that makes it easier to
determine who is speaking on a speaker channel when multiple parties are speaking.
This feature, introduced in Unigy v4.0, enables you to specify where the voice from individual parties is
presented. For each speaker channel, you can assign one of the following spatial positions:
IPC Proprietary
icon of the enabled speaker channel.
10.4: Use the Speakers application
Speaker solo mode
IQ/MAX TOUCH Turret User Guide
139
on
Unigy 4.3