Active Call Options; Enable Record On Demand; Mute A Call - IPC IQ/MAX TOUCH User Manual

a) Tap the
Left Ready
button displayed in the Context Call Display (CCD).
Redial
Figure 52: Redial button in CCD
1
An implicit hunt is performed to search for and seize an available line and the last number dialed
from the handset is redialed.
b) Seize any available line from your Favorites, then tap the
Call Display (CCD).
The last number dialed from the handset is dialed.
c) Tap a
Right Redial
An implicit hunt is performed to search for and seize an available line and the last number dialed
from the handset is redialed.
8.10

Active call options

8.10.1

Enable Record on Demand

The Record on Demand feature allows you to toggle Record on Demand on or off, if your user profile is
configured to do so.
Warning
Dynamic recording control is a specific requirement of worker union and regulations in Germany and Italy
only. Use of this feature outside of that region could violate other regulations.
The Record on Demand feature only applies to calls on the left or right handset (not speaker calls).
Record on Demand must be enabled by an administrator. This includes assigning a Right ROD and Left
ROD function button in Favorites.
Before placing a call, you can toggle recording on and off for a handset any number of times using a
Right ROD or Left ROD function button. During a call, you can toggle from the currently selected mode
(recording on or off) to the opposite mode; that selection remains in effect until the call ends and then
reverts to the default setting.
Tap the
Record
8.10.2

Mute a call

Mute a call on the handset or hands-free speaker.
IPC Proprietary
or status area in the footer of the Primary Module, then tap the
Right Ready
Redial button
or Function button in your Favorites.
Left Redial
button in the Contextual Call Display to toggle the feature OFF or ON.
8.10: Active call options
button displayed in the Context
Redial
IQ/MAX TOUCH Turret User Guide
103
Unigy 4.3