Adjust The Volume For Speaker Channels - IPC IQ/MAX TOUCH User Manual

134 10.4: Use the Speakers application
•
If your speaker channel is set to Push-to-Latch, touch the
latched speaker channel.
Your voice transmission ends.
10.4.4

Adjust the volume for speaker channels

Set the overall volume of all the speaker channels, or set the volume of individual speaker channels in
the Speakers application.
For information on adjusting the volume for non-solo speaker channels when a channel is in solo mode,
refer to Use speaker solo mode
1. To adjust the overall volume of all speaker channels:
a) Tap the
Global speaker audio
The
Global Speakers Audio
Figure 57: Global speakers audio
b) To decrease the volume for all speakers, drag the volume slider left or tap the
the volume, drag the volume slider right or tap the
c) Tap the
Global speakers audio
2. To adjust the volume of an individual speaker channel, tap and slide the volume slider on the speaker
channel down to decrease the volume or slide it up to increase the volume.
August 26, 2019
on page 138.
icon.
volume slider bar is displayed below the application header bar.
icon.
+
icon again to close the Speakers volume bar.
button to release the
Push-to-Talk
icon. To increase
-
IPC Proprietary