Set The Latch Type For Speaker Groups - IPC IQ/MAX TOUCH User Manual

Figure 67: Speakers: Groups
1
Batch Settings Mode
2
Groups
3 Groups the speaker channel is assigned to
4 Currently selected speaker group
2. Tap the
Groups
3. At the bottom of the screen, tap the speaker group from which you are removing the speaker channel.
4. Tap the speaker channel to remove it from the group.
If you are removing more than one speaker channel from the group, tap each of the speaker channels.
The speaker group number is removed from the speaker channel.
5. Tap the
Batch Settings Mode
10.5.3

Set the latch type for speaker groups

You can set the latch behavior for speaker groups to Push-to-Talk or Push-to-Latch in the Settings
application.
1. Tap the
User Badge
2. Tap
Settings
3. Tap
Speakers
4. In the
Speaker Groups
5. Tap to exit Settings.
Close
IPC Proprietary
icon
button
button.
icon to exit edit mode.
in the footer.
.
.
section, tap
Push to Talk
10.5: Speaker groups
or for each speaker group.
Push to Latch/Unlatch
IQ/MAX TOUCH Turret User Guide
149
Unigy 4.3