Siemens SIMATIC NET S7-300 Manual page 48

2 Characteristics of the Ethernet CPs
2.3 Attachment Variants
Below, you will see several typical possible attachments.
For further information on attachment options and Ethernet structures, refer to the
Ethernet network manual /9/. For ordering data and information on further
components, please refer to the IK PI catalog.
2.3.1 Electrical Attachment
The CP can be attached to Industrial Ethernet as follows:
S Transceiver with AUI attachment
Figure 2-3
The CP provides the power supply required for the transceiver.
*)
The AUI attachment does not exist on all CPs for S7-300/S7-400; Please
note the information in the manual.
A -48
*)
CP
Transceiver
S7-CPs for Industrial Ethernet Configuring and Commissioning
CP
Transceiver cable
drop cable 727-1
C79000-G8976-C182-07
Release 01/2007