Siemens SIMATIC NET S7-300 Manual page 288

B Standards and Approvals for SIMATIC NET S7-CPs
CE mark
The SIMATIC NET S7-CPs listed above meet the requirements and aims of the
following EU directives and comply with the harmonized European standards (EN)
for programmable logic controllers published in the Official Journal of the European
Communities:
S 89/336/EEC "Electromagnetic Compatibility" (EMC Directive)
S 94/9/EEC „Equipment and Protective Systems for Use in Potentially Explosive
Atmospheres (Explosion Protection Directive)
The EU conformity certificates are available for the responsible authorities
according to the above-mentioned EU directive at the following address:
S Siemens Aktiengesellschaft
Bereich A&D
Industrielle Kommunikation SIMATIC NET
Postfach 4848
D-90327 Nuremberg
Germany
EMC Directive
The SIMATIC NET S7-CPs listed above are designed for use in an industrial
environment.
Area of Application
Industrial
Explosion Protection Directive
Complying with EN 50021 (Electrical apparatus for potentially explosive
atmospheres; Type of protection „n")
II 3 G EEx nA II T3..T6
Note
When using (installing) SIMATIC NET products in hazardous area zone 2, make
absolutely sure that the associated conditions are adhered to!
You will find these conditions here:
S On the SIMATIC NET Manual Collection CD
S On the Internet at the address
http://www4.ad.siemens.de/WW/news/en/13702947
A -288
Requirements
Noise emission
EN 61000–6–4 : 2001
S7-CPs for Industrial Ethernet Configuring and Commissioning
Noise immunity
EN 61000–6–2 : 2001
Release 01/2007
C79000-G8976-C182-07