Setting Further Cp Properties - Siemens SIMATIC NET S7-300 Manual

3.3.4

Setting Further CP Properties

Overview
In addition to the network attachment, you can also make further settings for the
specific module or you can call functions.
1. Select the Ethernet CP in the hardware configuration.
2. Select Edit
the dialog includes other tabs in addition to the "General" tab described in
Section 3.3.2:
Tabs
General
Addresses
Options
Time-of-day synchronization
User
Symbols
DNS parameters
Diagnostics
Addressing
IP Access Protection
IP Configuration
Port Parameters
FTP
PROFINET
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07
Object Properties. Depending on the type of CP you are using,
"
Settings for
Interface
Interface parameters for the user program
Time-of-day synchronization
Data transfer
Replace module without PG
Ethernet profile for fault-tolerant connections
Individual network settings
Send keepalives for connections
Multiplex OP connections / reserve internal CPU
connection resources
SIMATIC mode
NTP mode (NTP: Network Time Protocol)
Specify user permissions for IT functions
Symbolic access to variables using IT
functions
Specify the address for the domain name
server for E-mail services
Call NCM diagnostics (special diagnostics /
module diagnostics)
Select the station to initialize
Assign configured IP parameters
Edit the IP access list
Set the IP address
Individual network settings
Create / modify file allocation table
Specify properties for PROFINET IO and
PROFINET CBA
3 Operating the Ethernet CP with
A -69