Siemens SIMATIC NET S7-300 Manual page 182

7 Programming FCs (Functions) and FBs for S7 Ethernet CPs
Communicatio
Communicatio Communicatio
n Service /
n Service / n Service /
Functional
Functional Functional
Area
Area Area
FTP (IT-CPs) FC40
FC41
FC42
FC43
FC44
PROFINET CBA FB88
FB90
PROFINET IO FC11
FC12
FB52
FB54
1)
FB88 / FB90 is supplied along with the engineering tool SIMATIC iMap and is entered in the PROFINET
system library when you install the STEP 7 add-on.
2)
Not to be used with the current CPs and not part of the current SIMATIC_NET_CP library
3) depending on the CP type
Which Block Version Should I Use?
The following descriptions also include information on differences between the
various block versions. Please take note of the version identifiers of the blocks you
are using.
The SIMATIC Manager block libraries installed with STEP 7 / NCM S7 contain the
block versions that were current at the time of the STEP 7 release.
Note
We recommend that you always use the latest block versions for all module types.
You will find information on the current block versions and the current blocks to
download from the Internet in our customer support.
http://www4.ad.siemens.de/WW/news/en/8797900
With the older module types, this recommendation assumes that you are using the
latest firmware for the particular block type.
A -182
Block Type
Block Type Block Type
FTP_CONNECT
FTP_STORE
FTP_RETRIEVE
FTP_DELETE
FTP_QUIT
1) 1)
PN_InOut
1)
PN_InOut_Fast
PNIO_SEND
PNIO_RECV
PNIO_RW_REC
PNIO_ALARM
SIMATIC Manager Library
SIMATIC_NET_CP
CP 300 CP 400
x
x
x
x
x
1)
x x
x
x
x
x
x
S7-CPs for Industrial Ethernet Configuring and Commissioning
Described in
Described in Described in
x SIMATIC NET
IT CP M IT-CP, Manual l
x
/5/ /5/
x
x
x
1)
Section 7.7
1)
Section 7.7
Section 7.8
Section 7.8
Section 7.8
Section 7.8
Release 01/2007
C79000-G8976-C182-07