Operating The Ethernet Cp With; Step 7/Ncm S7 - Siemens SIMATIC NET S7-300 Manual

3 Operating the Ethernet CP with

STEP 7/NCM S7

To attach a SIMATIC station to Industrial Ethernet via the Ethernet CP, configure
the CP with the NCM S7 configuration software. The chapter explains the
following:
S How the CP is configured in the STEP 7 project
S How the various network configurations are managed (setting up access to
other systems)
S How to control and supply the CP with data using NCM S7
You will find further information in the following sources:
S When installing the Ethernet CP, please read the instructions in the
device-specific Part B of this manual. This also contains further information
about the performance of the Ethernet CP .
S For more information about the functions and applications of STEP 7 in which
the NCM S7 option is integrated, please read the following topics:
- For using the help functions, read the section Working with STEP 7 in /6/.
- Configuring and assigning parameters to modules in /6/
- Configuring networks in /6/. You will find this information in the online help
with integrated in STEP 7 by selecting Help
S You will find examples of configurations in the Primer.
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07
Contents.
"
A - 57