Routing To Distribute Load - Siemens SIMATIC NET S7-300 Manual

5 Configuring Communication Connections
5.9

Routing to Distribute Load

Routing to Distribute Load
If more than one CP of the same type exists in a station and is connected to the
same subnet, the route can be selected
Click the "Route" button in the "General" tab to display the route dialog:
If you have configured a load distribution on two or more Ethernet CPs at the local
or remote end, you can assign the connection to the required route via the CP.
A -158
.
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07