Siemens SIMATIC NET S7-300 Manual page 268

8 NCM S7 Diagnostics
Table 8-1 Meaning of the Menu Commands
Menu
Options Customize
"
Help
"
Note
If the connection to the CP is terminated during the diagnostic session, the
following message is displayed: "The online connection was terminated".
You can reestablish the connection to the CP with the corresponding
acknowledgment in the dialog. The connection is then automatically reestablished
whenever possible.
A -268
With this menu command, you set the general parameters for the diagnostic
session.
S
Dialog update time
This sets the interval at which the diagnostic data is updated in a
contents area when cyclic updating is selected.
S
Maximum size of the diagnostic buffer log file
This sets the maximum size of the file that is created with the menu
command Diagnostic Buffer > Save Cyclically...(specified in Kbytes)
You can obtain help about the current diagnostic function As an alternative,
you can also press the F1 key.
Remember that you can also call up context-related help for some of the
diagnostic functions. To obtain help, position the cursor on the output field
and press the F1 key.
S7-CPs for Industrial Ethernet Configuring and Commissioning
Meaning
C79000-G8976-C182-07
Release 01/2007