Siemens N 535D51 Technical Product Information

Gamma instabus
Switching Actuator N 535D51, 8 x AC 230 V, 16/20 AX, C-load
Switching actuator N 535D51

For switching capacitive, inductive and resistive loads
 Maintenance-free terminals for connecting and looping through solid, stranded and
fine-stranded conductors with conductor cross-sections from 0.5 to 2.5 mm²

Switching status display with operating capability for each output to test for correct
installation
Functions with configuration with ETS

Control functions:
Switching with status message, logic gate, central switching, timed switching, night
o
mode
Control value input for analogous values can be configured as an alternative to the
o
switching input
Integrated 8-bit scene control and assign of each output to up to 8 scenes
o

Override functions: Manual ON, permanent OFF, locks, central override, forced control

Diagnostic functions: Counting of switching cycles with threshold monitoring of switch
cycles, counting of operating hours with threshold monitoring of operating hours, load
detection with threshold monitoring of load check, status messages
Technical product information