Transmission Speeds Supported; Characteristic Data Of The Dp Interface; Data Record Routing - Siemens SIMATIC CP 4163-5 Operating Instructions Manual

1.4.2

Transmission speeds supported

The transmission speed is set in the configuration of the PROFIBUS network. For the
supported values, refer to the section Technical specifications (Page 31).
Note
Remember the cable length
The permitted cable length must be kept to depending on the transmission speed.
1.4.3

Characteristic data of the DP interface

General characteristic data
You can use the direct I/O access of the CPU to connect the distributed I/O.
Table 1- 1
Characteristic
Number of operable DP Devices
Max. size of the input area of all DP Devices
Max. size of the output area of all DP Devices
Maximum number of inputs per DP Device slave
Maximum number of outputs per DP Device
Max. size of the consistent area for a module
Diagnostics requests
As DP master (class 1), the CP supports diagnostics requests of a DP master (class 2).
1.4.4

Data record routing

Connections to field devices
Max. 16 connections can be established at the same time for data record routing with field
devices.
SIMATIC CP 4163-5
Operating Instructions, 12/2022, C79000-G8976-C589-01
General characteristic data of DP mode
Application and functions
1.4 Configuration limits and performance data
Explanation / values
125
6144 bytes
6144 bytes
244 bytes
244 bytes
128 bytes
13