Slew Sensors; Detected Adresses - RaycoWylie i3500 Instruction Manual

5.5 Slew Sensors
The displayed information will look similar to this:
Note: The informa-
tion depicted here
may differ depen-
ding on the rota-
tion sensor used.
The Ver line indicates the software version of the rotation interface and its
creation date (see fig. above).
rot: Represents the rotation pointer and varies from 0° to 359° (Azimut)
zero pos.: Represents an offset value between the absolute zero and the
relatif zero establish at the moment of calibration .
rot. dir.: Represents the rotation sense.
encoder type: Represents the type of sensor.
5.6 Detected addresses:
This menu page provides the sensor addresses on the CAN network detected
by the i3500 system. Addresses remain in memory as long as the system is
powered even if a sensor stops communicating.
Consult the i3500 Calibration Manual to view additional Diagnostic Menu
pages with information related to internal calibration parameters.
Telescopic Cranes Pressure Sensing
(rotation option)
55
i3500 Troubleshooting
Instruction Manual