Typical Components Location & Description - RaycoWylie i3500 Instruction Manual

1.5 Typical component location and description
1) i3500 display box: It is also the central processing unit (CPU) of the
i3500 system. Its principal feature is a CANBUS communication interface
and graphical LCD screen.
2) Angle sensor: A solid state angle sensor that is used to monitor the
angle of the boom.
3) Pressure sensors: Highly sensitive, built for precise lifting and
weighing in harsh environments.
4) Cable reel with angle and length sensor: A solid state angle sensor is
used to monitor the angle of the boom. A potentiometer is used to monitor
the boom length.
5) Anti-two block: the anti-two block switch is normally closed (with
weight hanging) spring-loaded switch (option).
6) Wind speed sensor: Shows wind speed value on the display (option).
Telescopic Cranes Pressure Sensing
9
i3500 Introduction
Instruction Manual