RaycoWylie i3500 Instruction Manual page 32

4.4.3 Parts of Line Selection
Carefully read and understand these instructions before selecting the Parts
of line used. Selecting the wrong Parts of line can result in overloading the
rope risking breakage that could result in serious injury or death. Make sure
that the Parts of line displayed in the normal mode screen matches the
current configuration of the machine.
Parts
of Line
Selection
Menu
Telescopic Cranes Pressure Sensing
Parts/Scroll down button (3)
This button allows the operator to select the number
of parts of line used.
To change the parts of line selection:
1) Press the Parts/Scroll down button (3) to display
the parts of line selection menu.
2) Scroll up or down with buttons (2) & (3) to
highlight the desired number of parts of line.
3) Push Select button (4) to confirm your choice.
26
i3500 Operation
The operator can
see the current
number of parts
selected just
above the hook
on the on the
i3500 screen.
Instruction Manual