1- General Description Of The System; Introduction; Personnel Qualification; Intented Use Of The I3500 System - RaycoWylie i3500 Instruction Manual

1.1

Introduction

This manual contains Operation, Troubleshooting and Maintenance
information for the i3500 system. When using i3500 system, always observe
the safety rules and regulations applicable in the country of operation to reduce
the risk of personal injury or damage to the equipment. Each safety instruction
throughout this manual must be taken into consideration when using the
i3500 system. The information contained in this manual will enable qualified
personnel to properly operate and efficiently perform maintenance.
1.2 Personnel qualification
The i3500 system shall be operated only by personnel without limitations in the
physical abilities of the upper limbs and no visual or hearing impairment, who
have completed all operator trainee qualification requirements and have read
and fully understood the instructions in this manual. Operator requirements
shall include: demonstrating the ability to read, write and comprehend and use
arithmetics and read and understand the load / capacity charts in the language
of the crane manufacturer's operating instruction materials. Maintenance of
the system is intended only for fully qualified and trained personnel for this task.
1.3 Intended use
The i3500 system is intended to provide a valuable aid to the crane operator
by indicating all relevant parameters typically shown on the duty chart of the
crane. The i3500 system shall prevent the crane from supporting a load outside
the limits of the permitted radii and outside the loads shown and described on
the rated capacity chart or the permissible working load of the ropes when set
and operated correctly.
Telescopic Cranes Pressure Sensing
General Description of the System
-1-
4
i3500 Introduction
Instruction Manual