3- Free Zone - RaycoWylie i3500 Instruction Manual

4.6.3 Free Zone
Telescopic Cranes Pressure Sensing
VIEW FROM TOP
1) Access the Range limiting main screen menu
(see page 44).
2) Use the Parts/Scroll down (3) button to highlight
''Free zone'' and press Select (4) button to confirm
your choice.
3) Rotate the crane to the first limit position (first wall).
Press Select (4) button to confirm that this will be
the position of the first wall.
4) Rotate the crane to the second limit position
(second wall). Press Select (4) button to confirm that
this will be the position of the second wall. As you
release Select (4) button, an 8-second countdown
will allow you to rotate the crane between the two
walls before your programmed free zone limit
becomes active.
5) T
o go back to Normal mode,
key switch'' to the ''Normal run'' position or ''Tracks
Stopped'' option (if available).
46 46
First wall
Second wall
turn the
''Range limiting
i3500 Operation
Instruction Manual