4.5.2
Limit Value Adjustment
or
or
Telescopic Cranes Pressure Sensing
1) Access the Operational limiting mode (refer to
section 4.5.1 for more details).
2) Use the Hoist/Scroll up (2) and Parts/Scroll
down (3) buttons to highlight the limit you
want to edit.
3) Press Select (4) button to confirm your choice.
4) Press the Hoist/Scroll up (2) and Down (3)
button to select the desired value for this
particular limit.
5) Press Select (4) button to confirm the selected
value.
6) Press Escape (5) button to return to the
normal operating mode.
40
i3500 Operation
Instruction Manual