4.6.2
Limit High
Telescopic Cranes Pressure Sensing
1) The «Limit High» option is highlighted by default.
Press Select (4) button to confirm your choice.
2) Boom up to the desired boom tip height limit.
3) Press Select (4) button to confirm the maximum
boom tip height position. As you release Select (4)
button, an 8-second countdown will allow you to
boom down before your programmed height limit
becomes active.
4) T
o go back to Normal mode,
limiting key switch'' to the ''Normal run'' position or
''Tracks stopped'' option (if available).
45
turn the
''Range
Instruction Manual
i3500 Operation