Operational Limits - RaycoWylie i3500 Instruction Manual

4.5 Operational Limits Setting
Carefully read and understand these instructions before setting the
Operational Limits. Setting the wrong Operational Limits can result in
accidentally running into obstacles which could lead to serious injury or death.
In the Operational Limits Setting Mode, the operator can set and activate/
deactivate four (4) operational limits in addition to those automatically
provided by the i3500 RCI system. These are as follows:
1) The Minimum Boom Angle Limit.
2) The Maximum Boom Angle limit.
3) The Maximum Boom Tip Height Limit.
4) The Maximum Operating Radius Limit.
Important: Please note that if your machine is
equipped with the Range limiting key switch option,
the Operational Limits setting mode will Not be
available for selection (refer to section 4.4.8 of this
manual for more details).
Telescopic Cranes Pressure Sensing
38
i3500 Operation
Instruction Manual