5- System Configuration Information Screen - RaycoWylie i3500 Instruction Manual

4.4.5 System Configuration Information Screen
Simply pressing the Info (8) button is a convenient way to verify the current
configuration of your crane. At a glance, you can check the settings for
numerous parameters such as the outrigger state, boom length, jib selection
etc. If all the data under the chart info screen is correct and if you had
previously set the correct hoist and parts of line number, then your system
should be configured correctly.
Press the Info (8) button repeatedly to display the current crane
configuration.
Press the Escape (5) button to return to the normal mode
screen.
The chart info screen is different for each crane model. The representation depicted
above may not be identical to the chart info screen shown on your system.
Telescopic Cranes Pressure Sensing
Chart Info Screen
Once your system is properly configured, the
i3500 Rated Capacity Indicator is ready to use
28
i3500 Operation
.
Instruction Manual