4.6
Range Limiting Option
Carefully read and understand these instructions before setting
the Operational Range Limits. Setting the wrong Operational
Range Limits can result in accidentally running into obstacles
which could lead to serious injury or death.
Crane travel is prohibited when Range Limiting is activated.
The Operational Range Limits settings must be reprogrammed
everytime the crane is moved.
RaycoWylie recognizes that operating cranes in
proximity to power lines or equipment is an extremely
hazardous practice that requires extra precautions. It
is therefore essential to operate the crane outside the
minimum clearances allowed in such a way that there is
no possibility of the crane, load line or load becoming a
conductive path, to avoid the risk of being electrocuted.
The crane shall not be used to handle material stored
under electrical power lines unless any combination
of boom, load, load line, or machine cannot enter the
prohibited zone. The range limiting option provided
by the i3500 system shall not be used to delimit the
prohibited zone. Refer to federal, state, local safety
standards and regulations applicable in your country
regarding operating cranes in proximity to power lines.
Telescopic Cranes Pressure Sensing
42
i3500 Operation
Instruction Manual