3- Installation & Calibration; 4- Operating Instructions; Safety Instructions - RaycoWylie i3500 Instruction Manual

Installation of the i3500 system shall be performed by a qualified technician.
Furthermore, calibration of the i3500 system must be performed by a
RaycoWylie certified technician. The RaycoWylie technician will perform a
complete and structured verification of the whole system before beginning the
system's calibration.
Failure to calibrate the system properly can result in overloading of the
crane risking machine breakage or tipping that could result in serious injury
or death. Always refer to a RaycoWylie certified technician to calibrate
your system.
Installation and calibration manuals are available at
4.1 Safety Instructions:
When operating the i3500 system, always observe the safety rules and
regulations applicable in the country of operation to reduce the risk of
personal injury or damage to the equipment. Read the following safety
instructions before attempting to operate this system.
1. The i3500 Rated Capacity Indicator must be properly set-up according to
the crane's configuration and operating work site situation. Wrong Set-up
can cause the i3500 indicator system to show unreliable information
which may result in hazardous conditions arising such as an overload.
2. The i3500 system is purely an aid to the operator. Responsibility for
the safe operation of the crane lies with the crane operator. The i3500
system will not necessarily prevent crane damage due to overloading
and/or other related causes.
Telescopic Cranes Pressure Sensing
Installation & Calibration
RaycoWylie upon request. Please note that the installation
and calibration instructions have intentionally not been
included in this instruction manual.
Operating Instructions
-3-
-4-
19
i3500 Operation
Instruction Manual