2- Units Selection - RaycoWylie i3500 Instruction Manual

4.4.6.2
Display
unit menu
or
Telescopic Cranes Pressure Sensing
Units Selection
It is possible to choose between 5 unit combinations.
Each measure of length and load will be displayed on
the main display.
To change the units proceed as follows:
1) Repeat steps 1 to 3 of the system setup options sec-
tion (see page 29 of this manual). Select units.
2) The Units line should be highlighted on the
display by now. If not, scroll up or down with the
Hoist/Scroll up (2) or Parts/Scroll down (3)
button to highlight he desired unit combination.
3) Press the Select (4) button to confirm your choice.
31
i3500 Operation
Instruction Manual