RaycoWylie i3500 Instruction Manual page 20

i3500 Introduction
SELECT BUTTON
Used to select a highlighted item in a menu. In
normal mode, use this button to select the infor-
mation displayed in one of the pull-down menus.
If no menu is opened, used to scroll through the
configuration at the bottom line of the display.
ESCAPE BUTTON
Used to close a menu or to cancel the modification of a
value. Push it several times to return to normal mode.
HELP BUTTON
This button will show the problem source when a fault
is detected by the system. Press it to see the description
of the problem.
DUTY BUTTON
Shows the menu for the selection of the duty by
number or by crane configuration. Press this button
to enable the selection of crane parameters like the
boom length, the head type and the counterweight, (if
available).
INFO BUTTON
Shows all the information regarding the current crane
configuration. Press it a second time to access the
operating system's information screen and a third
time to see the data logger screen (option).
BYPASS/ RIGGING BUTTON
Used to enter the rigging mode. (See sections 4.4.7 &
4.4.7.1 for complete details)
TARE BUTTON
Toggles the load display between the actual load
and the tared load.
TEST FUNCTION (Buttons 9 & 10)
Press them simultaneously at any time during normal
operation, to check the functioning of the warnings
(without the need to lift a load), keypad, relays or display.
Note: The crane must not be in overload condition.
Telescopic Cranes Pressure Sensing Instruction Manual
14