Lucent Technologies SLC 5 Series Manual page 12

SLC‚ Series 5 Remote Terminal 363-205-401 TOP
Feature Packages
The SLC Series 5 Carrier System offers several feature package configurations.
The choice of feature package is determined by the bank control unit (BCU) and
alarm display unit (ADU), and supporting common units. Option settings on the
ADU also determine the feature package configuration. Feature packages are
abbreviated when referred to in text (for example FPC = Feature Package C).
The following is a summary of SLC Series 5 Carrier System feature packages.
FPA – FPA has been rated DA (discontinued availability) and provides
POTS service only.
FPB – FPB provides a TR-08* interface that can be universal ( SLC 96
COT),
modes, unconcentrated or concentrated), and provides special services.
The service capabilities of FPB are abbreviated in text as follows:
FPC – FPC provides POTS special service capabilities.
FPC-AutoCut – FPC-AutoCut provides the same features as FPC and can
be cutover to FPB/SS/I/M1 without requiring dispatch to the RT site.
FPD – FPD provides a low bit rate voice FPC capability (reduces the
number of required digital facilities).
FTTH – Fiber to the Home (FTTH) is supported by FPC, FPC-AutoCut, and
FPB/SS/M1 or FPB/SS/M2. FTTH has two configurations:
FPF – FPF supports SLC -2000 MSDT feature and provides the same type
service capabilities as FPC (using FPC-AutoCut configuration).
Procedures to equip the MSDT are found in 363-205-004.
FP303 – With full-access time slot interchange (TSI), FP303 provides
variable concentration of 96 lines on 2, 3, or 4 DS1 facilities. FP303
supports single party, multiparty (superimposed and frequency selective
ringing), coin (coin first and dial tone first), direct inward dialing services
and two-wire locally-switched special services in the CSA.
* Bellcore Technical Reference TR-TSY-000008 Issue 2, August 1987, Digital Interface
Between the SLC 96 Digital Loop Carrier System and a Local Digital Switch.
*
integrated (TR-08 digital switch), Mode 1 or Mode 2 ( SLC 96
FPB/[U or I] — U for universal, I for integrated
FPB/[U or I]/[M1 or M2]/ — M1 for Mode 1, M2 for Mode 2
FPB/[SS]/[U or I]/[M1 or M2]/ — SS for special services.
Distant terminal versions provide up to four POTS lines per 900A( )
DT cabinet.
SLC -2000 multi-services distant terminal (MSDT) provides up to 24
POTS or special service lines per MSDT cabinet.
Issue 7 March 1997 ix