Programming - Mitsubishi Electric Q Series Reference Manual

7 APPLICATION FUNCTIONS

7.4.5 Programming

7 - 30
This section describes the formats of dedicated instructions available for network
modules and program examples.
POINT
The descriptions in this section are based on the MELSECNET/H specifications.
For access to CC-Link IE controller network, refer to the reference manual for the
CC-Link IE controller network.
To perform the following processing in transient transmission, it is necessary to provide
an interlock:
When using the same channel with multiple instructions (See Example 1.)
When executing instructions from a redundant system (See Example 2.)
MELSEC-Q
7 - 30