Mitsubishi Electric Q Series Reference Manual page 248

7 APPLICATION FUNCTIONS
Control data setting command
Send data setting command
Send command
7 - 46
1) Program for station number 1 (SEND instruction)
When using the following program, interlock the program by seeing
Section 6.1.
Processing program at send completion
Processing program at normal completion
Processing program at abnormal completion
No arrival confirmation/set clock data
Channel 2 used by the host
Target station storage channel (logical channel No. 13)
Target station network No. 7
All network station number 7
Number of resends (5 times)
Arrival monitoring time (20 s)
Send data length (4 words)
Send data
Start sending
Read error code, etc.
MELSEC-Q
7 - 46