Mitsubishi Electric Q Series Reference Manual page 53

3 SPECIFICATIONS
Table 3.1 Performance specifications of the network modules (continued)
Item
External dimensions
Weight
1 The number of LY points of the stations set in the I/O master station is the sum total of the LY points for output to all stations within the block.
2 For old optical fiber cables (A-2P- ), L type differs from H type in the distance between stations. Refer to Section 4.6.1 for details.
3 Two slots are occupied.
Set the numeric value resulted from adding 10
first empty 16 points can be set to "0" on the "I/O assignment" tab screen within the "Q Parameter" screen.
Example: Set 10 as the "Starting I/O No." when the module is mounted on slot 0.
H
(Set 0 as the "Starting I/O No." when 0 has been set to slot 0 on the "I/O assignment" tab screen.)
H
3
3 - 2
QJ71LP21 QJ71LP21-25
98 (3.86)(H) 27.4 (1.08)(W) 90
(3.54)(D) [mm (inch)]
0.11 kg
to the I/O No. of the slot where a module mounted as the "Starting I/O No." of the "Network parameter". The
H
Optical loop system
QJ71LP21S-25 QJ71LP21G
98 (3.86)(H) 55.2
98 (3.86)(H)
(2.18)(W) 90
(3.54)(D) [mm(inch)]
(3.54)(D) [mm(inch)]
0.20kg
MELSEC-Q
QJ71LP21GE
55.2 (2.18)(W) 90
0.11kg
3 - 2