Ui Introduction; Home Screen - NovaStar MX Series User Manual

4

UI Introduction

4.1 Home Screen

After the device is powered on, the home screen showing device related information is displayed as follows.
Figure 4-1 Home screen
The home screen shown in
Home screen descriptions
Area Content
Top line MX30
All-In-Once Controller
192.168.255.160
www.novastar.tech
Figure 4-1 is described in Table
Description
The device name
The name can be changed in VMP software.
The device working mode

All-In-One Controller: The video processing and sending functions are
available.

Send-Only Controller: Only the video sending function is available.
For related operations, please refer to
The device button lock status

When the icon displayed: The buttons are locked.

When the icon not displayed: The buttons are unlocked.
Hold down the knob and BACK button simultaneously for 5s or longer to lock
or unlock the buttons.
The connection status of the Ethernet ports

Blue: Connected

Gray: Disconnected
The device IP address
For related operations, please refer to
Settings.
MX30 LED Display Controller User Manual
4-1.
7.1 Switch Working
7.3 Configure Communication
Mode.
7