INVT Goodrive200A Series Operation Manual page 50

GD200A series VFD
Function
Name
code
Dead time of
P01.13 FWD/REV
rotation
Shifting
between
P01.14
FWD/REV
rotation
P01.15 Stopping speed 0.00–100.00Hz
Detection of
P01.16
stopping speed
Detection time
P01.17
of the feedback
Description
the DC braking current is, the greater the braking
torque is.
DC braking time: The retention time of DC brake.
If the time is 0, the DC brake is invalid. The VFD
will stop at the set deceleration time.
ACC
P01.23
P01.04
P13.14
Setting range of P01.09:
(the max. frequency)
Setting range of P01.10: 0.00–50.00s
Setting range of P01.11: 0.0–100.0%
Setting range of P01.12: 0.00–50.00s
During the procedure of switching FWD/REV
rotation, set the threshold by P01.14, which is as
the table below:
Output frequency
FWD
Stopping
speed
Starting
frequency
Setting range: 0.0–3600.0s
Set the threshold point of the VFD:
0: Switch after 0 frequency
1: Switch after the starting frequency
2: Switch after the stopping speed
0: Detect according to speed setting (no stopping
delay)
1: Detect according to speed feedback (only valid
for vector control)
If P01.16 is set to 1, the feedback frequency is
less than or equal to
-43-
P01.09
T
Constant
speed DEC
P01.10
P01.12
P13.15
ON
0.00Hz–P00.03
Shift after the
stopping speed
Shift after the
starting frequency
Shift after the
zero frequency
Dead
zone
REV
P01.15 and detect in the set
Function parameters
Default
Modify
value
0.0s
T
◎
1
0.50 Hz ◎
◎
1
◎
0.50s
○