Game Board; Removing The Game Board - Sega VIRTUA COP Owner's Manual

16. GAME BOARD

 In order to prevent electric shock and short circuit hazards, be sure to turn power
off before performing work.
 Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a fire risk.
 Do not expose the Game BD, etc. without a good reason. Failure to observe this
can cause electric shock hazard or malfunctioning.
 Do not use this product with connectors other than those that were connected
and used with the Game Board at the time of shipping. Do not carelessly con-
nect wires to connectors that were not used at the time of shipping, as this may
cause overheating, smoke or fire damage.
 In this product, setting changes are made during the test mode. The Game BD
need not be operated. Use the Game BD, etc. as is with the same setting made
at the time of shipment so as not to cause electric shock and malfunctioning.
 Static electricity from your body may damage some electronics devices on the
IC board. Before handling the IC board, touch a grounded metallic surface so
that the static electricity can be discharged.

16-1 REMOVING THE GAME BOARD

 Turn off power.
 Take off the 2 screws from the cabinet, unlock, and remove the LID UPPER.
LID UPPER
www.seuservice.com
Unlock.
TRUSS SCREW (2), black
M4×16
PHOTO 16. 1 a
100